Kubota L275

Specifications and review tractor Kubota L275 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Kubota L275The Kubota L275 is a 2WD (L275) or 4WD (L275DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1981 to 1985. The Kubota L275 is equipped with a 1.3 L three-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 7 reverse gears.

The Kubota L275 compact utility tractor used the Kubota D1302A engine. It is a 1.3 L, 1,299 cm2, (79.3 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. This engine produced 27.9 PS (20.5 kW; 27.5 HP) of maximum horsepower and 23.8 PS (17.5 KW; 23.5 HP) of PTO output power.

The Kubota L275 is equipped with manual or power assist (option) steering, differential mechanical wet disc brakes, open operator station with two-post ROPS and 28.0 liters (7.4 US gal.; 6.2 Imp. gal) fuel tank.


Kubota L275 Specifications

General Specifications
Model Kubota L275
Length 2,860 mm (112.6 in)
Width 1,390 mm (54.7 in)
Height 1,980 mm (78 in)
Wheel base 2WD: 1,680 mm (66.1 in)
4WD: 1,640 mm (64.6 in)
Weight 1,180 kg (2601 lbs)
Fuel tank capacity 28.0 liters (7.4 US gal.; 6.2 Imp. gal)
Battery 12V
Cabin type Open operator station with two-post ROPS
Engine
Engine model Kubota D1302A
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.3 L, 1,299 cm2, (79.3 cu·in)
Bore and stroke 82.0 mm X 82.0 mm (3.23 in X 3.23 in)
Compression ratio 21.0:1
Horsepower 27.9 PS (20.5 kW; 27.5 HP)
Starter Electric
Oil capacity: 6.1 L (6.45 US. qt, 5.37 Imp. qt.)
Coolant capacity: 6.6 L (6.97 US. qt, 5.81 Imp. qt.)
Injection timing 25 ° B.T.D.C.
Injection pressure 13,720-14,700 kPa (1,990-2,135 psi)
Intake / Exhaust valve clearance 0.18-0.22 mm (0.007-0.009 in)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual or power assist (option)
Brakes Differential mechanical wet disc
Front axle differential case(4WD) 2.6 L (2.75 US.qts, 2.29 Imp. qts)
Front axle outer drive case (4WD) – each 0.3 L (0.32 US. qts., 0.26 Imp. qts.)
Steering gear box (manual) 0.3 L (0.32 US. qts., 0.26 Imp. qts.)
Transmission model
Transmission type Gear type with dry disc clutch
Gears 8 forward and 7 reverse
Speed Forward: 20.0 kmh (12.4 mph) Reverse: 13.5 (8.4 mph)
Transmission oil capacity 24.0 L (6.3 US. gal, 5.3 Imp. gal.)
Tires
Front tires Ag: 5.00-15 (2WD), 7.2-16 (4WD)
Lawn/turf: 23×8.50-12 (2WD), 27×8.50-16 (4WD)
Rear tires Ag: 11.2-24
Lawn/turf: 13.6-16

Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 24.0 L (25.36 US. qt, 21.12 Imp. qt.)
Pump flow 6.2 gpm (23.5 lpm)

Maybe that’s all the information about the Kubota L275 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment