Specifications and review tractor Kubota L295 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Kubota L295 is a 2WD or 4WD (L295DT) compact utility tractor from the L series. This tractor was manufactured by the Kubota from 1978 to 1982. The Kubota L295 is equipped with a 1.3 L three-cylinder diesel engine and gear type transmission with 8 forward and 2 reverse gears.
The Kubota L295 compact utility tractor used the Kubota D1301A engine. It is a 1.3 L, 1,299 cm2, (79.3 cu·in) three-cylinder natural aspirated diesel engine with 82.0 mm (3.23 in) of the cylinder bore and 82.0 mm (3.23 in) of the piston stroke. The compression ratio rating is 21.0:1. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 2,800 rpm of horsepower and 26.8 PS (19.7 KW; 26.4 HP) of PTO output power.
The Kubota L295 is equipped with manual steering, differential mechanical wet disc brakes, open operator station with two-post ROPS and 35.0 liters (9.2 US gal.; 7.7 Imp. gal) fuel tank.
|
|
Kubota L295 Specifications
| General Specifications | |
| Model | Kubota L295 |
| Length | 2,840 mm (111.8 in) |
| Width | 1,420 mm (55.9 in) |
| Height | 1,400 mm (55.1 in) |
| Wheel base | 1,650 mm (65.0 in) |
| Weight | 1,300 kg (2,866 lbs) |
| Fuel tank capacity | 35.0 liters (9.2 US gal.; 7.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station with two-post ROPS |
| Engine | |
| Engine model | Kubota D1301A |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.3 L, 1,299 cm2, (79.3 cu·in) |
| Bore and stroke | 82.0 mm X 82.0 mm (3.23 in X 3.23 in) |
| Compression ratio | 21.0:1 |
| Horsepower | 30.5 PS (22.4 kW; 30 HP) at 2,800 rpm |
| Starter | Electric |
| Oil capacity: | 6.1 L (6.45 US. qt, 5.37 Imp. qt.) |
| Coolant capacity: | 5.8 L (6.13 US. qt, 5.1 Imp. qt.) |
| Compression pressure | 3,235 kPa (470 psi) |
| Injection timing | 25 ° B.T.D.C. |
| Injection pressure | 13,720-14,700 kPa (1,990-2,135 psi) |
| Intake / Exhaust valve clearance | 0.18-0.22 mm (0.007-0.009 in) |
|
|
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Manual |
| Brakes | Differential mechanical wet disc |
| Steering gear box (manual) | 0.3 L (0.32 US. qts, 0.26 Imp. qts.) |
| Front axle differential case(4WD) | 2.0 L (2.1 US. qts, 1.76 Imp. qts.) |
| Front axle outer drive case(4WD) | 1.5 L (1.6 US.qts, 1.32 Imp. qts.) |
| Transmission model | – |
| Transmission type | Gear type |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 12.1 kmh (7.5 mph) Reverse: 10.3 (6.4 mph) |
| Transmission oil capacity |
2WD: 26.0 L (6.9 US gal, 5.7 Imp. gal.) 4WD: 27.0 L (7.1 US gal, 5.9 Imp. gal.) |
| Tires | |
| Front tires | Ag: 5.00-15 |
| Rear tires | Ag: 12.4-24 |
|
|
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Live |
| Rear PTO spped | 540/700/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pump flow | 5.5 gpm (20.8 lpm) |
Maybe that’s all the information about the Kubota L295 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
