Specifications and review tractor Kubota M62 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Kubota M62 is a 4WD backhoe loader tractor from the M series. This tractor has been manufactured by the Kubota in since 2016. The Kubota M62 is equipped with a 2.4 L four-cylinder turbocharged diesel engine and hydrostatic transmission with infinite (3-range) forward and reverse gears.
The Kubota M62 backhoe loader tractor used the Kubota V2403 engine. It is a 2.4 L, 2,434 cm2, (148.5 cu·in) four-cylinder turbocharged diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 102.4 mm (4.03 in) of the piston stroke. This engine produced 63 PS (46.3 kW; 62.0 HP) at 2,700 rpm of net horsepower and 46.6 PS (34.3 KW; 46.0 HP) of PTO output power.
The Kubota M62 is equipped with hydraulic type power steering, multiple wet disks brakes, four-post ROPS/FOPS and 67.0 liters (17.7 US gal.; 14.7 Imp. gal) fuel tank.
Following attachments are available for the Kubota M62 backhoe loader tractor:
- Kubota TL1800/TL1800V loader
- Kubota BT1400 backhoe
|
|
Kubota M62 Specifications
| General Specifications | |
| Model | Kubota M62 |
| Length (w/o 3P, loader, backhoe) | 3,159 mm (124.4 in) |
| Width (w/o loader) | 1,905 mm (75.0 in) |
| Height | 2,595 mm (102.2 in) |
| Wheel base | 2,050 mm (80.7 in) |
| Weight | 2,264 kg (4991 lbs) |
| Fuel tank capacity | 67.0 liters (17.7 US gal.; 14.7 Imp. gal) |
| Battery | 12V, CCA: 650A |
| Cabin type | Four-post ROPS/FOPS |
| Engine | |
| Engine model | Kubota V2403 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 2.4 L, 2,434 cm2, (148.5 cu·in) |
| Bore and stroke | 87.0 mm X 102.4 mm (3.43 in X 4.03 in) |
| Horsepower | 63 PS (46.3 kW; 62.1 HP) at 2,700 rpm |
| Starter | Electric |
| Oil capacity: | 9.4 L (9.93 US. qt, 8.27 Imp. qt.) |
| Coolant capacity: | 8.2 L (8.66 US. qt, 7.21 Imp. qt.) |
|
|
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydraulic type power |
| Brakes | Multiple wet disks |
| Differential | Bevel gear |
| Front axle case | 12.5 L (13.2 US.qts, 11.0 Imp. qts) |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite (3-range) forward and reverse |
| Speed | Forward: 25.1 kmh (15.6 mph) Reverse: 24.7 (15.4 mph) |
| Transmission oil capacity | 46.0 L (12.2 US. gal, 10.1 Imp. gal.) |
| Tires | |
| Front tires | Industrial: 10-16.5 |
| Rear tires | Industrial: 17.5L-24 |
|
|
| Three-Point Hitch | |
| Caterogy | II/I |
| Control type | Position control |
| Lift capacity (at ends) | 1,268 kg (2,796 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Steering flow | 6.6 gpm (25 lpm) |
| Total flow | 39.0 gpm (147.6 lpm) |
Maybe that’s all the information about the Kubota M62 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
