Mahindra 2538

Specifications and review tractor Mahindra 2538 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mahindra 2538The Mahindra 2538 is a 2WD compact utility tractor from the 2500 series. This tractor has been manufactured by the TYM for Mahindra since 2016. The Mahindra 2538 is equipped with a 2.7 L four-cylinder diesel engine and hydrostatic transmission with Infinite (3-range) forward and reverse gears.

The Mahindra 2538 compact utility tractor used the Mahindra engine. It is a 2.7 L, 2,731 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 18.7:1. This engine produced 37.9 PS (27.9 kW; 37.4 HP) at 2,400 rpm of maximum output power.

The Mahindra 2538 is equipped with power steering, wet disc brakes, two-post foldable ROPS or Cab with air-conditioning (optional), and 34.0 liters (9 US gal.; 7.5 Imp. gal) fuel tank.

Following attachments are available for the Mahindra 2538 compact utility tractor:

  • Mahindra 2538L loader
  • Mahindra 2538B backhoe

Mahindra 2538 Specifications

General Specifications
Model Mahindra 2538
Length ROPS: 3,030 mm (119.3 in)
Cab: 3,070 mm (121.2 in)
Width 1510 mm (59.4 in)
Height ROPS: 2,390 mm (94.4 in)
Cab: 2,340 mm (92.5 in)
Wheel base
Weight ROPS: 1,420 kg (3,130 lbs)
Cab: 1,520 kg (3,350 lbs)
Fuel tank capacity 34.0 liters (9 US gal.; 7.5 Imp. gal)
Battery 12V, CCA 800A
Cabin type Two-post foldable ROPS or Cab with air-conditioning (optional)
Engine
Engine model Mahindra
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.7 L, 2,731 cm2, (166.7 cu·in)
Bore and stroke 89.0 mm X 110.0 mm (3.5 in X 4.33 in)
Compression ratio 18.7:1
Horsepower 37.9 PS (27.9 kW; 37.4 HP) at 2,400 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Hydrostatic with wet disc clutch
Gears Infinite (3-range) forward and reverse
Tires
Front tires Ag: 7-16
Industrial: 10-16.5
Rear tires Ag: 11.2-24
Industrial: 43×16-20

Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 1200 kg (2646 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 to 2
Pump flow 7.6 gpm (28.8 lpm)
Steering flow 4.1 gpm (15.5 lpm)
Total flow 11.7 gpm (44.3 lpm)

Maybe that’s all the information about the Mahindra 2538 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment