Mahindra 4110

Specifications and review tractor Mahindra 4110 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mahindra 4110The Mahindra 4110 is a 4WD compact utility tractor from the 10 series. This tractor was manufactured by TYM for Mahindra in South Korea from 2002 to 2009. The Mahindra 4110 is equipped with a 2.0 L (122.0 cu·in) four-cylinder diesel engine and a synchromesh shuttle transmission with dry disc clutch and 12 forward and 12 reverse gears.

The Mahindra 4110 compact utility tractor used the Daedong 4A200 engine. It is a 2.0 L, 1,999 cm2, (122.0 cu·in) four-cylinder natural aspirated diesel engine with 83.0 mm (3.27 in) of the cylinder bore and 92.4 mm (3.64 in) of the piston stroke. The compression ratio rating is 22.0:1. This engine produced 41.6 PS (30.6 kW; 41.0 HP) at 2,700 rpm of maximum output power.

The Mahindra 4110 is equipped with hydrostatic power steering, wet disc brakes, two-post foldable ROPS and 35.0 liters (9.2 US gal.; 7.7 Imp. gal) fuel tank.


Mahindra 4110 Specifications

General Specifications
Model Mahindra 4110
Length 3,530 mm (139 in)
Width 1,490 mm (58.7 in)
Height
Wheel base -/td>
Weight 1,800 kg (3,968 lbs)
Fuel tank capacity 35.0 liters (9.2 US gal.; 7.7 Imp. gal)
Battery 12V, 110Ah
Cabin type Two-post foldable ROPS
Engine
Engine model Daedong 4A200
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.0 L, 1,999 cm2, (122.0 cu·in)
Bore and stroke 83.0 mm X 92.4 mm (3.27 in X 3.64 in)
Compression ratio 22.0:1
Horsepower 41.6 PS (30.6 kW; 41.0 HP) at 2,700 rpm
Starter Electric
Oil capacity: 7.0 L (7.4 US. qt, 6.2 Imp. qt.)
Coolant capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Synchomesh shuttle with dry disc clutch
Gears 12 forward and 12 reverse
Transmission oil capacity 29.0 L (7.7 US. gal, 6.4 Imp. gal.)
Tires
Front tires Ag: 8-16
Rear tires Ag: 13.6-24

Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 1,300 kg (2,870 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Valves 1
Pump flow 7.87 gpm (29.8 lpm)
Steering flow 4.65 gpm (17.6 lpm)

Maybe that’s all the information about the Mahindra 4110 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment