Mahindra 4530

Specifications and review tractor Mahindra 4530 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mahindra 4530The Mahindra 4530 is a 4WD utility tractor from the 30 series. This tractor was manufactured by Mahindra in Maharashtra, India from 2005 to 2017. The Mahindra 4530 is equipped with a 2.4 L (146.1 cu·in) three-cylinder diesel engine and a synchro shuttle transmission with dry cerametallic lining clutch and 8 forward and 8 reverse gears.

The Mahindra 4530 utility tractor used the Mahindra engine. It is a 2.4 L, 2,394 cm2, (146.1 cu·in) three-cylinder natural aspirated diesel engine with 19.4:1 of compression ratio rating for model from 2005 to 2009, and 18.0:1 after 2010. This engine produced 43.1 PS (31.7 kW; 42.5 HP) at 2,100 rpm of output power (2005-2009) or 44.6 PS (32.8 KW; 44.0 HP) at 2,100 rpm of output power (2010-2017).

The Mahindra 4530 is equipped with hydrostatic power steering, dry disc brakes, two-post foldable ROPS, and 64.7 liters (17.1 US gal.; 14.2 Imp. gal) fuel tank.

Following attachments are available for the Mahindra 4530 utility tractor:

  • Mahindra ML245 loader
  • Mahindra 595 backhoe

Mahindra 4530 Specifications

General Specifications
Model Mahindra 4530
Length 3,400 mm (133.9 in)
Width 1,850 mm (72.8 in)
Wheel base
Weight 2,590 kg (5,710 lbs)
Fuel tank capacity 64.7 liters (17.1 US gal.; 14.2 Imp. gal)
Battery 12V, 96Ah
Cabin type Two-post foldable ROPS
Engine model Mahindra NE342
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.4 L, 2,394 cm2, (146.1 cu·in)
Bore and stroke
Compression ratio rating: 2005-2009: 19.4:1
2010-2017: 18.0:1
Horsepower 2005-2009: 43.1 PS (31.7 kW; 42.5 HP) at 2,100 rpm
2010-2017: 44.6 PS (32.8 KW; 44.0 HP) at 2,100 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Dry disc
Transmission model
Transmission type Synchro shuttle with dry with cerametallic lining clutch
Gears 8 forward and 8 reverse
Front tires Ag: 9.5×20
Industrial: 10.5/80×18
Rear tires Ag: 13.6×28
Industrial: 16.9×24

Three-Point Hitch
Caterogy II/I
Control type Position and draft control
Lift capacity (at ends) 1,799 kg (3,967 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 2 (optional)
Pump flow 10.9 gpm (41.3 lpm)
Steering flow 4.8 gpm (18.2 lpm)
Total flow 15.7 gpm (59.4 lpm)

Maybe that’s all the information about the Mahindra 4530 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment