Mahindra 4550

Specifications and review tractor Mahindra 4550 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mahindra 4550The Mahindra 4550 is a 2WD or 4WD utility tractor from the 4500 series. This tractor has been manufactured by the Mahindra since 2014. The Mahindra 4550 is equipped with a 2.7 L four-cylinder diesel engine and gear type transmission with dry disc clutch and 8 forward and 2 reverse gears.

The Mahindra 4550 utility tractor used the Mahindra engine. It is a 2.7 L, 2,732 cm2, (166.7 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. It is a Tier IV, direct injection motor with 18.7:1 of compression ratio rating. This engine produced 48.7 PS (35.8 kW; 48.0 HP) at 2,300 rpm of maximum output power.

The Mahindra 4550 is equipped with hydrostatic power steering, dry disc brakes, open operator station with two-post ROPS and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.

Following attachments are available for Mahindra 4550 utility tractor:

  • Mahindra 4550-2L loader
  • Mahindra 4550-4L loader
  • Mahindra 4550B backhoe

Mahindra 4550 Specifications

General Specifications
Model Mahindra 4550
Length 2WD: 3,030 mm (119.3 in)
4WD: 3,220 mm (127.0 in)
Width 2WD: 1,790 mm (70.5 in)
4WD: 1,860 mm (73.6 in)
Height 2WD: 2,340 mm (92.1 in)
4WD: 2,370 mm (93.7 in)
Wheel base
Weight 2WD: 1,935 kg (4,266 lbs)
4WD: 2,400 kg (5,292 lbs)
Fuel tank capacity 55.0 liters (14.5 US gal.; 12.1 Imp. gal)
Battery 12V, 96Ah
Cabin type Open operator station with two-post ROPS
Engine
Engine model Mahindra
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.7 L, 2,732 cm2, (166.7 cu·in)
Bore and stroke 89.0 mm X 110.0 mm (3.5 in X 4.33 in)
Compression ratio 18.7:1
Horsepower 48.7 PS (35.8 kW; 48.0 HP) at 2,300 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Dry disc
Transmission model
Transmission type Gear type with dry disc clutch
Gears 8 forward and 2 reverse
Tires
Front tires Ag: 6×16 (2WD), 9.5×16 (4WD)
Industrial: 12.6×16.5
Rear tires Ag: 12.4×28
Industrial: 16.9×24

Three-Point Hitch
Caterogy II/I
Control type Position and draft control
Lift capacity 1,600 kg (3,528 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with dual-stage clutch
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1
Total flow 8.7 gpm (32.9 lpm)
Steering flow 5.0 gpm (18.9 lpm)

Maybe that’s all the information about the Mahindra 4550 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment