Mahindra 6075

Specifications and review tractor Mahindra 6075 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mahindra 6075The Mahindra 6075 is a 4WD utility tractor. This tractor has been manufactured by Mahindra since 2018. The Mahindra 6075 is equipped with a 2.6 L (161.6 cu·in) three-cylinder diesel engine and a power shuttle transmission with 15 forward and 15 reverse gears.

The Mahindra 6075 utility tractor used the Mahindra engine. It is a 2.6 L, 2,648 cm2, (161.6 cu·in) three-cylinder turbocharged diesel engine with 96.0 mm (3.78 in) of the cylinder bore and 122.0 mm (4.8 in) of the piston stroke. This engine produced 71.9 PS (52.9 kW; 71.0 HP) of output power.

The Mahindra 6075 is equipped with power steering, wet disc brakes, two-post folding ROPS, or Cab with air-conditioning (optional), and 90.0 liters (23.8 US gal.; 19.8 Imp. gal) fuel tank.

Following attachments are available for the Mahindra 6075 utility tractor:

  • Mahindra 6075L loader
  • Mahindra 65B backhoe

Mahindra 6075 Specifications

General Specifications
Model Mahindra 6075
Width 1,990 mm (78.3 in)
Height ROPS: 2,660 mm (104.7 in)
Cab: 2,990 mm (115.0 in)
Wheel base 2,210 mm (87 in)
Weight ROPS: 3,060 kg (6,745 lbs)
Cab: 3,400 kg (7,495 lbs)
Fuel tank capacity 90.0 liters (23.8 US gal.; 19.8 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS or Cab with air-conditioning (optional)
Engine model Mahindra
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.6 L, 2,648 cm2, (161.6 cu·in)
Bore and stroke 96.0 mm X 122.0 mm (3.78 in X 4.8 in)
Horsepower 71.9 PS (52.9 kW; 71.0 HP)
Starter Electric

Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Power shuttle
Gears 15 forward and 15 reverse
Front tires Ag: 11.2-24
Industrial: 12.5×80-18
Rear tires Ag: 16.9-30
Industrial: 19.5×24

Three-Point Hitch
Caterogy II
Control type Position and draft control
Lift capacity (at ends) 2,199 kg (4,850 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic wet disc clutch
Rear PTO speed 540/540E rpm
Hydraulic system
Hydraulic type Open center
Pump flow 11.1 gpm (42 lpm)
Steering flow 4.6 gpm (17.4 lpm)
Total flow 15.7 gpm (59.4 lpm)

Maybe that’s all the information about the Mahindra 6075 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment