Massey Ferguson 1225

Specifications and review tractor Massey Ferguson 1225 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Massey Ferguson 1225The Massey Ferguson 1225 is a 2WD/4WD compact utility tractor from the series. This tractor was manufactured by Iseki for distributor Massey Ferguson from 1999 to 2002. The Massey Ferguson 1225 is equipped with a 1.1 L (68.5 cu·in) three-cylinder diesel engine and one of two transmissions: a gear type transmission with 6 forward and 2 reverse gears or a hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Massey Ferguson 1225 compact utility tractor used the Iseki E3112 engine. It is a 1.1 L, 1,122 cm2, (68.5 cu·in) three-cylinder natural aspirated diesel engine with 78.0 mm (3.07 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 22.5:1. This engine produced 24.6 PS (18.1 kW; 24.3 HP) at 2,800 rpm of output power.

The Massey Ferguson 1225 is equipped with power steering, mechanical dry shoe brakes, two-post ROPS, and 23.1 liters (6.1 US gal.; 5.1 Imp. gal) fuel tank.

Massey Ferguson 1225 Specifications

General Specifications
Model Massey Ferguson 1225
Length 2,310 mm (90.9 in)
Width 1,040 mm (40.9 in)
Height (ROPS) 1,910 mm (75.2 in)
Wheel base 1,510 mm (59.4 in)
Ground clearance 270 mm (10.6 in)
Weight (shipping) 2WD gear: 620 kg (1,367 lbs)
4WD hydro: 680 kg (1,499 lbs)
Fuel tank capacity 23.1 liters (6.1 US gal.; 5.1 Imp. gal)
Battery 12V, CCA 450A
Cabin type Two-post ROPS
Engine model Iseki E3112
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.1 L, 1,122 cm2, (68.5 cu·in)
Bore and stroke 78.0 mm X 78.0 mm (3.07 in X 3.07 in)
Compression ratio 22.5:1
Horsepower 24.6 PS (18.1 kW; 24.3 HP) at 2,800 rpm
Torque 67.0 N·m (6.8 kg·m, 49.4 ft·lb) at 2,000 rpm
Starter Electric
Oil capacity: 2.7 L (2.9 US. qt, 2.4 Imp. qt.)
Coolant capacity: 7.1 L (7.5 US. qt, 6.2 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Mechanical dry shoe
Final drive Outboard planetary
Transmission model
Transmission type Gear type with dry disc clutch
Gears 6 forward and 2 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 21.6 kmh (13.4 mph) Reverse: 16.1 kmh (10 mph)
Front tires Ag: 5.00-12 (2WD), 6-12 (4WD)
Rear tires Ag: 9.5-16

Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends) 550 kg (1,213 lbs)
PTO (Power take-off shaft)
Middle PTO type
Middle PTO speed 2000 rpm
Rear PTO type Transmission (gear) or independent (hydro)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 14.0 L (3.7 US. gal, 3.1 Imp. gal.)
Pressure 1,990 psi (137.2 bar)
Pump flow 2.6 gpm (9.8 lpm)
Steering flow 2.7 gpm (10.2 lpm)
Total flow 5.3 gpm (20.1 lpm)

Maybe that’s all the information about the Massey Ferguson 1225 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment