Specifications and review tractor Massey Ferguson 1260 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Massey Ferguson 1260 is a 4WD compact utility tractor from the 1200 Compact series. This tractor was manufactured by Iseki for distributor Massey Ferguson in from 1992 to 2002. The Massey Ferguson 1260 is equipped with a 1.5 L (91.4 cu·in) three-cylinder diesel engine and a synchro shuttle transmission with 16 forward and 16 reverse gears and dry disc clutch.
The Massey Ferguson 1260 compact utility tractor used the Iseki E3CD engine. It is a 1.5 L, 1,497 cm2, (91.4 cu·in) three-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. The compression ratio rating is 21.8:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,600 rpm of output power.
The Massey Ferguson 1260 is equipped with power assist steering, wet disc brakes, two-post foldable ROPS, and 30.0 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 1260 compact utility tractor:
Mid-mount Massey Ferguson 1231 72 in (1,820 mm) mower deck
Front-mount Massey Ferguson 1405 66 in (1,670 mm) blade
Front-mount Massey Ferguson 1410 63 in (1,600 mm) two-stage snow blower with hydraulic lift
Massey Ferguson 1246 loader
Massey Ferguson 1217 backhoe
Massey Ferguson 1260 Specifications
General Specifications
Model
Massey Ferguson 1260
Length
3,090 mm (121.7 in)
Width
1,420 mm (55.9 in)
Height
2,190 mm (86.2 in)
Wheel base
1,720 mm (67.7 in)
Ground clearance
330 mm (13 in)
Weight
1,450 kg (3,197 lbs)
Fuel tank capacity
30.0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery
12V
Cabin type
Two-post foldable ROPS
Engine
Engine model
Iseki E3CD
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
3
Fuel type
Diesel
Displacement
1.5 L, 1,497 cm2, (91.4 cu·in)
Bore and stroke
87.0 mm X 84.0 mm (3.43 in X 3.31 in)
Compression ratio
21.8:1
Horsepower
40.5 PS (29.8 kW; 40 HP) at 2,600 rpm
Torque
118.0 N·m (12 kg·m, 87 ft·lb) at 1,600 rpm
Starter
Electric
Coolant capacity:
6.5 L (6.9 US. qt, 5.7 Imp. qt.)
Transmission and chassis
Chassis
4×4 MFWD 4WD
Steering type
Power assist
Brakes
Wet disc
Transmission model
–
Transmission type
Synchro shuttle with dry disc clutch
Gears
16 forward and 16 reverse
Speed
Forward: 26.1 kmh (16.2 mph) Reverse: kmh (0 mph)
Tires
Front tires
Ag: 8.00-16
Rear tires
Ag: 13.6-24
Three-Point Hitch
Category
I
Control type
Position and draft control
Lift capacity (at ends)
1,300 kg (2,870 lbs)
PTO (Power take-off shaft)
Middle PTO type
Independent with electro-hydraulic clutch (optional)
Middle PTO speed
1925 rpm
Rear PTO type
Independent with electro-hydraulic clutch
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
Open center
Hydraulic capacity
25.0 L (6.6 US. gal, 5.5 Imp. gal.)
Pump flow
6.3 gpm (23.8 lpm)
Total flow
9.6 gpm (36.3 lpm)
Maybe that’s all the information about the Massey Ferguson 1260 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Massey Ferguson 1260 is a 4WD compact utility tractor from the 1200 Compact series. This tractor was manufactured by Iseki for distributor Massey Ferguson in from 1992 to 2002. The Massey Ferguson 1260 is equipped with a 1.5 L (91.4 cu·in) three-cylinder diesel engine and a synchro shuttle transmission with 16 forward and 16 reverse gears and dry disc clutch.
