Massey Ferguson 253

Specifications and review tractor Massey Ferguson 253 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Massey Ferguson 253The Massey Ferguson 253 is a 2WD or 4WD utility tractor from the 200 series. This tractor was manufactured by Massey Ferguson from 1988 to 1998. The MF 253 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 8 forward and 2 reverse gears or a synchronized manual shuttle transmission with 8 forward and 8 reverse gears.

The Massey Ferguson 253 utility tractor used the Perkins AT3.152.4 engine. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) three-cylinder turbocharged diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. This engine produced 57.8 PS (42.5 kW; 57.0 HP) at 2,250 rpm of output power.

The Massey Ferguson 253 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 47.7 liters (12.6 US gal.; 10.5 Imp. gal) fuel tank.

Following attachments are available for the MF 253 utility tractor:

  • Massey Ferguson 232 loader
  • Massey Ferguson 236 loader

Massey Ferguson 253 Specifications

General Specifications
Model Massey Ferguson 253
Length 2WD: 3,180 mm (125.2 in)
4WD: 3,250 mm (128 in)
Width 2WD: 1,770 mm (69.7 in)
4WD: 1,860 mm (73.2 in)
Height (ROPS) 2,200 mm (86.6 in)
Wheel base 2WD: 1,930 mm (76 in)
4WD: 1,950 mm (76.8 in)
Ground clearance 2WD: 240 mm (9.4 in)
4WD: 290 mm (11.4 in)
Weight 2WD: 1,825 kg (4,023 lbs)
4WD: 2,145 kg (4,729 lbs)
Fuel tank capacity 47.7 liters (12.6 US gal.; 10.5 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine model Perkins AT3.152.4
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.5 L, 2,491 cm2, (152.0 cu·in)
Bore and stroke 91.0 mm X 127.0 mm (3.58 in X 5 in)
Horsepower 57.8 PS (42.5 kW; 57.0 HP) at 2,250 rpm
Starter Electric
Oil capacity: 10.2 L (10.8 US. qt, 9 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Wet disc
Transmission model
Transmission type Sliding gear
Gears 8 forward and 2 reverse
Transmission model
Transmission type Synchronized manual shuttle
Gears 8 forward and 8 reverse
Front tires Ag: 6.50-16 (2WD), 280/80R-20
Rear tires Ag: 13.6-28 (2WD), 14.9-28 (4WD)

Three-Point Hitch
Category II
Control type Position and draft control
Lift capacity (at ends) 1,190 kg (2,625 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with two-stage clutch or independent (4WD)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 43.0 L (11.4 US. gal, 9.5 Imp. gal.)
Pump flow 4.2 gpm (15.9 lpm)

Maybe that’s all the information about the Massey Ferguson 253 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment