Specifications and review tractor Massey Ferguson 261 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Massey Ferguson 261 is a 2WD utility tractor from the 200 series. This tractor was manufactured by Ursus for distributor Massey Ferguson in Poland from 1992 to 1997. The Massey Ferguson 261 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
The Massey Ferguson 261 utility tractor used the Perkins AD4.236 engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,000 rpm of output power.
The MF 261 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 79.5 liters (21 US gal.; 17.5 Imp. gal) fuel tank.
Massey Ferguson 261 Specifications
General Specifications
Model
Massey Ferguson 261
Length
3,750 mm (147.6 in)
Width
1,920 mm (75.6 in)
Height (ROPS)
2,450 mm (96.5 in)
Wheel base
2,220 mm (87.4 in)
Ground clearance
340 mm (13.4 in)
Weight
–
Fuel tank capacity
79.5 liters (21 US gal.; 17.5 Imp. gal)
Battery
12V
Cabin type
Two-post ROPS
Engine
Engine model
Perkins AD4.236
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Diesel
Displacement
3.9 L, 3,867 cm2, (236.0 cu·in)
Bore and stroke
98.0 mm X 127.0 mm (3.86 in X 5 in)
Horsepower
60.8 PS (44.7 kW; 60.0 HP) at 2,000 rpm
Starter
Electric
Coolant capacity:
14.0 L (14.8 US. qt, 12.3 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD
Steering type
Hydrostatic power
Brakes
Wet disc
Transmission model
–
Transmission type
Sliding gear
Gears
8 forward and 2 reverse
Tires
Front tires
Ag: 7.50-16
Rear tires
Ag: 16.9-30
Three-Point Hitch
Category
II/I
Control type
Position and draft control
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Live with two stage clutch
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
Open center
Hydraulic capacity
41.6 L (11 US. gal, 9.2 Imp. gal.)
Maybe that’s all the information about the Massey Ferguson 261 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Massey Ferguson 261 is a 2WD utility tractor from the 200 series. This tractor was manufactured by Ursus for distributor Massey Ferguson in Poland from 1992 to 1997. The Massey Ferguson 261 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
