Massey Ferguson 270

Specifications and review tractor Massey Ferguson 270 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

The Massey Ferguson 270 is a two-wheel tractor, manufactured by Massey Ferguson from 1983 to 1986. The Massey Ferguson 270 tractor is equipped with Perkins A4.236 diesel engine and two transmission options: manual type transmission with 8 forward and 2 reverse or Multi-Power transmission with 12 forward and 4 reverse (three speeds in two ranges plus two-speed power shift).

The MF 270 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Perkins A4.236, with 98.4 mm (3.87 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. Compression ratio rating is 16.0:1. The A4.236 engine produced 56.0 PS (41.0 kW; 55.0 HP) of output power on PTO-shaft. The engine used oil bath or dual dry element air cleaner with over-bonnet pre-cleaner and single, high capacity fuel filter.

The Massey Ferguson 270 used hydrostatic power-assisted steering and differential hydraulic wet disc brakes. The Massey Ferguson 270 used open operator station, a two-post rollover protection structure (ROPS) or cabin was available as an option.

Massey Ferguson 270 specifications

General Specifications
Model Massey Ferguson 270
Length 3,730 mm (147 in.)
Width 2,150 mm (85 in)
Wheelbase 2,130 mm (84 in.)
Ground clearance
Weight (operating) 3,130 kg (6,900 lb.)
Fuel tank capacity 79.5 l (21.0 Gal.)
Battery 12V 95A

Engine Perkins A4.236
Engine model Perkins A4.236
Number of Cylinders 4
Firing order 1-3-4-2
Fuel Diesel
Displacement 3.9 L, 3,890 cc (239
Bore x stroke 98.4 x 127 mm (3.87 x 5 in)
Power output PTO:56.0 PS (41.0 kW; 55.0 HP)
Starter type Electric starter
Oil type
Governed Speeds Low Idle: 725-775 rpm;
High Idle: 2,185 rpm; (no load)
Rated: 2,000 rpm (full load)
Oil capacity 6.6 L (7.0 U.S. qt)
Coolant capacity 14.2 L (15.0 U.S. qt)
Injection Timing, B.T.D.C. 23°
Injector opening pressure 17,235 kPa (2,500 psi)
Valve clearance (Cold) Intake: 0.30 mm (0.012 in.)
Exhaust: 0.30 mm (0.012 in.)
Valve clearance (Hot) Intake: 0.25 mm (0.010 in.)
Exhaust: 0.25 mm (0.010 in.)

Tires size
Front tires 6.50-16
Rear tires 16.9-24

Transmission and chassis
Chassis 4×2 2WD
Steering Power assisted
Gear transmission
Transmission type Gear shift
Gears 8 forward and 2 reverse
Ground speed Forward: up to 33.6 km/h (21.0 mph)
Reverse: up to 13.8 km/h (8.6 mph)
Multi-Power transmission
Transmission type Multi-Power (Three speeds in two ranges plus two-speed power shift operated by pedal)
Gears 12 forward and 4 reverse
Ground speed Forward: up to 30.0 km/h (19.0 mph)
Reverse: up to 15.4 km/h (9.6 mph)
PTO (Power take-off shaft)
PTO Type: Rear, live type
Rear, independent (option)
PTO Speed: 540 rpm
Hydraulic lift
3-point linkage: Category II
Control system:
No. of remote valves: 1-3
Max lifting capacity (at link end):
Hydraulic system
Type Open center
Total flow 53.0 lpm (14.0 gpm) or 64.3 lpm (17.0 gpm)
Oil capacity (Transmission, Differential and Hydraulic System) 41.6 L (11.0 US. gal.)
Rear axle planetary (Each) 1.4 L (1.4 U.S. qt.)
Power steering 1.1 L (1.2 U.S. qt.)

Maybe that’s all the information about the Massey Ferguson 270 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment