Specifications and review tractor Massey Ferguson 275 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Massey Ferguson 275 is a two-wheel tractor, manufactured by Massey Ferguson from 1975 to 1983. The Massey Ferguson 275 tractor is equipped with four-cylinder Perkins A4.248 (4.1 L) diesel engine and two transmission options: manual type transmission with 8 forward and 2 reverse or Multi-Power transmission with 12 forward and 4 reverse (three speeds in two ranges plus two-speed power shift).
The MF 275 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Perkins A4.248, with 101.0 mm (3.97 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. Compression ratio rating is 16.0:1. The A4.248 engine produced 68 PS (50 kW; 67.0 HP) of output power on PTO-shaft. The engine used oil bath or dual dry element air cleaner with over-bonnet pre-cleaner and single, high capacity fuel filter.
The Massey Ferguson 275 used hydrostatic power-assisted steering, differential lock operated by foot-pedal and differential hydraulic wet discs brake or dry discs brake. The MF 275 used open operator station, a two-post rollover protection structure (ROPS) or cabin ware available as an option. The tractor could be equipped with Massey Ferguson 236 front-loader.
Massey Ferguson 275 specifications
General Specifications
Model
Massey Ferguson 275
Length
–
Width
1,880 mm (74 in.)
Height
Standard: 1,600 mm (63.1 in.) Row-crop: 1,700 mm (67.3 in.) Low-profile: 1,570 mm (62.1 in.)
Wheelbase
2,080 mm (82 in.)
Ground clearance
–
Weight (operating)
2,998 kg (6,610 lb.)
Fuel tank capacity
70.0 l (18.5 Gal.)
Battery
12V 180A
Engine
Engine model
Perkins A4.248
Number of Cylinders
4
Firing order
1-3-4-2
Fuel
Diesel
Displacement
4.06 L, 4,060 cc (248 cu.in.)
Bore x stroke
101 x 127 mm (3.975 x 5.0 in)
Power output
PTO:68 PS (50 kW; 67.0 HP)
Torque
–
Starter type
Electric starter
Oil type
–
Governed Speeds
Low Idle: 725-775 rpm; High Idle: 2,185 rpm; (no load) Rated: 2,000 rpm (full load)
Oil capacity
6.6 L (7.0 U.S. qt)
Coolant capacity
11.3 L (12.0 U.S. qt)
Injection Timing, B.T.D.C.
24°
Injector opening pressure
17,235 kPa (2,500 psi)
Valve clearance (Cold)
Intake: 0.30 mm (0.012 in.) Exhaust: 0.30 mm (0.012 in.)
Valve clearance (Hot)
Intake: 0.25 mm (0.010 in.) Exhaust: 0.25 mm (0.010 in.)
Forward: up to 30.7 km/h (19.1 mph)
Reverse: up to 12.7 km/h (7.9 mph)
Multi-Power transmission
Transmission type
Multi-Power (Three speeds in two ranges plus two-speed power shift operated by pedal)
Gears
12 forward and 4 reverse
Ground speed
Forward: up to 30.6 km/h (19.0 mph)
Reverse: up to 15.4 km/h (9.6 mph)
PTO (Power take-off shaft)
PTO Type:
Rear, live type
Rear, independent (option)
PTO Speed:
540 rpm
Hydraulic lift
3-point linkage:
Category II
Control system:
–
No. of remote valves:
0-2
Max lifting capacity (at link end):
1,859 kg (4,100 lb.)
Hydraulic system
Type
Open center
Total flow
73.8 lpm (19.5 gpm)
Pressure
–
Oil capacity (Transmission, Differential and Hydraulic System)
Dry brakes: 38.7 L (10.0 US. gal.)
Wet brakes: 41.6 L (11.0 US. gal.)
Rear axle planetary (Each)
1.4 L (1.4 U.S. qt.)
Power steering
0.95 L (1.0 U.S. qt.)
Maybe that’s all the information about the Massey Ferguson 275 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Massey Ferguson 275 is a two-wheel tractor, manufactured by Massey Ferguson from 1975 to 1983. The Massey Ferguson 275 tractor is equipped with four-cylinder Perkins A4.248 (4.1 L) diesel engine and two transmission options: manual type transmission with 8 forward and 2 reverse or Multi-Power transmission with 12 forward and 4 reverse (three speeds in two ranges plus two-speed power shift).
