Specifications and review tractor Massey Ferguson 283 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Massey Ferguson 283 is a 2WD or 4WD utility tractor from the 200 series. This tractor was manufactured by Massey Ferguson in Coventry, England and in Brazil from 1985 to 1999. The Massey Ferguson 283 is equipped with a 4.1 L (248.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
The Massey Ferguson 283 utility tractor used the Perkins A4.248 engine. It is a 4.1 L, 4,064 cm2, (248.0 cu·in) four-cylinder natural aspirated diesel engine with 101.0 mm (3.98 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 90.3 PS (66.4 kW; 89.0 HP) at 2,200 rpm of output power.
The MF 283 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 82.0 liters (21.7 US gal.; 18 Imp. gal) fuel tank. This tractor could be equipped with the Massey Ferguson 236 loader.
Massey Ferguson 283 Specifications
General Specifications
Model
Massey Ferguson 283
Length
3,690 mm (145.3 in)
Width
2,010 mm (79.1 in)
Height
2,520 mm (99.2 in)
Wheel base
2,140 mm (84.3 in)
Ground clearance
410 mm (16.1 in)
Weight
2,465 kg (5,434 lbs)
Fuel tank capacity
82.0 liters (21.7 US gal.; 18 Imp. gal)
Battery
12V
Cabin type
Two-post ROPS
Engine
Engine model
Perkins A4.248
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
4
Fuel type
Diesel
Displacement
4.1 L, 4,064 cm2, (248.0 cu·in)
Bore and stroke
101.0 mm X 127.0 mm (3.98 in X 5 in)
Horsepower
90.3 PS (66.4 kW; 89.0 HP) at 2,200 rpm
Starter
Electric
Coolant capacity:
14.4 L (15.2 US. qt, 12.7 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD or 4×4 MFWD 4WD
Steering type
Hydrostatic power
Brakes
Wet disc
Transmission model
Transmission type
Sliding gear
Gears
8 forward and 2 reverse
Tires
Front tires
Ag: 7.50-16
Rear tires
Ag: 18.4-30
Three-Point Hitch
Caterogy
II
Control type
Position and draft control
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Live with two stage clutch
Rear PTO speed
540 rpm
Hydraulic system
Hydraulic type
Open center
Hydraulic capacity
40.9 liters (10.8 US gal, 9 Imp. gal)
Maybe that’s all the information about the Massey Ferguson 283 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
The Massey Ferguson 283 is a 2WD or 4WD utility tractor from the 200 series. This tractor was manufactured by Massey Ferguson in Coventry, England and in Brazil from 1985 to 1999. The Massey Ferguson 283 is equipped with a 4.1 L (248.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
