Massey Ferguson 290

Specifications and review tractor Massey Ferguson 290 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Massey Ferguson 290The Massey Ferguson 290 is a two-wheel (4×2 2WD) tractor or four-wheel (4×4 MFWD 4WD), manufactured by Massey Ferguson from 1983 to 1986. The Massey Ferguson 290 tractor is equipped with four-cylinder Perkins A4.248 (4.1 L) diesel engine and two transmission options: manual type transmission with 8 forward and 2 reverse or Multi-Power transmission with 12 forward and 4 reverse (three speeds in two ranges plus two-speed power shift).

The MF 290 tractor used a four-cylinder naturally-aspirated liquid-cooled diesel engine Perkins A4.248, with 101.0 mm (3.97 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. Compression ratio rating is 16.0:1. This engine produced 67 PS (49.2 kW; 66 HP) of output power on PTO-shaft and 81 PS (59.7 kW; 80 HP) of maximum gross power. The engine used oil bath or dual dry element air cleaner with over-bonnet pre-cleaner and single, high capacity fuel filter.


The Massey Ferguson 290 used hydrostatic power-assisted steering, differential lock operated by foot-pedal and differential hydraulic wet discs brake. The MF 2290 used open operator station, a two-post rollover protection structure (ROPS) or cabin ware available as an option.

Massey Ferguson 290 specifications

General Specifications
Model Massey Ferguson 290
Length 2WD: 3,830 mm (151 in.)
4WD: 3,880 mm (153 in.)
Width 2,150 mm (85 in.)
Height 1,690 mm (70 in.)
Wheelbase 2WD: 2,130 mm (84 in.)
4WD: 2,290 mm (90 in.)
Ground clearance 370 mm (15 in.)
Weight (operating) 2,694 kg (5,940 lb.)
Fuel tank capacity 80.0 l (21.0 Gal.)
Battery 2x12V

Engine
Engine model Perkins A4.248
Number of Cylinders 4
Firing order 1-3-4-2
Fuel Diesel
Displacement 4.06 L, 4,060 cc (248 cu.in.)
Bore x stroke 101 x 127 mm (3.975 x 5.0 in)
Power output PTO: 67 PS (49.2 kW; 66 HP)
Gross: 81 PS (59.7 kW; 80 HP)
Torque
Starter type Electric starter
Oil type
Governed Speeds Low Idle: 725-775 rpm;
High Idle: 2,185 rpm; (no load)
Rated: 2,000 rpm (full load)
Oil capacity 6.6 L (7.0 U.S. qt)
Coolant capacity 11.3 L (12.0 U.S. qt)
Injection Timing, B.T.D.C. 24°
Injector opening pressure 17,235 kPa (2,500 psi)
Valve clearance (Cold) Intake: 0.30 mm (0.012 in.)
Exhaust: 0.30 mm (0.012 in.)
Valve clearance (Hot) Intake: 0.25 mm (0.010 in.)
Exhaust: 0.25 mm (0.010 in.)

Tires size
Front tires 6.50-16
7.5L-15
7.50-16
9.5L-15
10.00-16
4WD: 12.4-24
Rear tires 16.9×24
16.9-28
16.9-30
18.4-30
15.5-38

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering Hydrostatic power assisted
Gear transmission
Transmission type Gear shift
Gears 8 forward and 2 reverse
Ground speed Forward: up to 32.8 km/h (20.4 mph)
Reverse: up to 13.5 km/h (8.4 mph)
Multi-Power transmission
Transmission type Multi-Power (Three speeds in two ranges plus two-speed power shift operated by pedal)
Gears 12 forward and 4 reverse
Ground speed Forward: up to 30.6 km/h (19.0 mph)
Reverse: up to 15.6 km/h (9.7 mph)
PTO (Power take-off shaft)
PTO Type: Rear, live type with dual clutch
Rear, independent (option)
PTO Speed: 540 rpm
540/1000 rpm
Hydraulic lift
3-point linkage: Category II
Control system:
No. of remote valves: 1-3
Max lifting capacity (at link end):
Hydraulic system
Type Open center
Total flow 53.0 lpm (14 gpm) or 64.3 lpm (17 gpm)
Pressure 207 bar (3,000 psi)
Oil capacity (Transmission, Differential and Hydraulic System) 41.6 L (11.0 US. gal.)
Rear axle planetary (Each) 1.4 L (1.4 U.S. qt.)
Power steering 1.1 L (1.2 U.S. qt.)

Maybe that’s all the information about the Massey Ferguson 290 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment