Specifications and review tractor Massey Ferguson 35 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Massey Ferguson 35 is a 2WD utility tractor manufactured by the Massey Ferguson in Detroit, Michigan, USA from 1960 to 1965. The MF 35 is equipped with one of two engines: a 2.5 L three-cylinder diesel engine or a 2.2 L four-cylinder gasoline engine and one of two transmissions: gear type transmission with dry disc clutch and 6 forward and 2 reverse gears or partial power shift transmission with 12 forward and 4 reverse gears.
The tractor could be equipped with the following engines:
- Perkins 3.152. It is a 2.5 L, 2,502 cm2, (152.7 cu·in) three-cylinder natural aspirated diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.4:1.
- Continental. This gasoline engine was available after 1961. It is a 2.2 L, 2,196 cm2, (134.0 cu·in) four-cylinder natural aspirated gasoline engine. The cylinder bore is 84.0 mm (3.31 in) and the piston stroke is 98.0 mm (3.86 in). The compression ratio rating is 6.6:1.
The MF 35 is equipped with manual steering, independent manual shoe/drum brakes, open operator station and 52.6 liters (13.9 US gal.; 11.6 Imp. gal) fuel tank.
|
Massey Ferguson 35 Specifications
General Specifications | |
Model | Massey Ferguson 35 |
Length | 2,970 mm (116.9 in) |
Width | 1,610 mm (63.4 in) |
Height | 1,370 mm (53.9 in) |
Wheel base | 1,820 mm (71.7 in) |
Weight (ballasted) | 2,680 kg (5,908 lbs) |
Fuel tank capacity | 52.6 liters (13.9 US gal.; 11.6 Imp. gal) |
Battery | Gas: 1 x 12V, Diesel: 2 x 6V |
Cabin type | Open operator station |
Engine | |
Engine model | Perkins 3.152 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,502 cm2, (152.7 cu·in) |
Bore and stroke | 91.0 mm X 127.0 mm (3.58 in X 5 in) |
Compression ratio | 17.4:1 |
Horsepower | – |
Starter | Electric |
Engine | |
Engine model | Continental |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 2.2 L, 2,196 cm2, (134.0 cu·in) |
Bore and stroke | 84.0 mm X 98.0 mm (3.31 in X 3.86 in) |
Compression ratio | 6.6:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 5.7 L (6 US. qt, 5 Imp. qt.) |
Coolant capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
Spark plug gap | 0.63 mm (0.025 in) |
Intake/exhaust valve clearance | 0.330 mm (0.013 in) |
|
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Independent manual shoe / drum |
Differential lock | Rear optional |
Transmission model | – |
Transmission type | Gear type with dry disc clutch |
Gears | 6 forward and 2 reverse |
Speed | Forward: 23.5 kmh (14.6 mph) Reverse: 11.4 (7.1 mph) |
Transmission oil capacity | 30.0 L (7.9 US. gal, 6.6 Imp. gal.) |
Transmission oil type | SAE 80 GL1 |
Transmission model | Multi-Power |
Transmission type | Partial power shift |
Gears | 12 forward and 4 reverse |
Speed | Forward: 30.8 kmh (19.1 mph) Reverse: 15.3 (9.5 mph) |
Transmission oil capacity | 30.3 L (8 US. gal, 6.7 Imp. gal.) |
Transmission oil type | SAE 80 GL1 |
Tires | |
Front tires | Ag: 5.50-16, 6.00-16 |
Rear tires | Ag: 10-28, 11-28, 13-24 |
|
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Hydraulic capacity | 30.3 L (32.02 US. qt, 26.66 Imp. qt.) |
Pressure | 2800 psi (193.1 bar) |
Pump flow | 3.5 gpm (13.2 lpm) |
Maybe that’s all the information about the Massey Ferguson 35 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you