Massey Ferguson 360

Specifications and review tractor Massey Ferguson 360 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Massey Ferguson 360The Massey Ferguson 360 is a 2WD/4WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1991. The MF 360 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and one of three transmissions: a gear type transmission with 8 forward and 2 reverse gears, a mechanical shuttle transmission with 6 forward and 2 reverse gears or a synchromesh transmission with 12 forward and 4 reverse gears.

The Massey Ferguson 360 utility tractor used the Perkins AT3.152 engine. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) three-cylinder turbocharged diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm of output power.

The MF 360 is equipped with hydrostatic power steering, differential wet disc brakes, two-post ROPS, and 68.1 liters (18 US gal.; 15 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 360 utility tractor:

  • Massey Ferguson 232 loader – for 2WD
  • Massey Ferguson 236 loader – for 2WD
  • Massey Ferguson 832 loader – for 4WD

Massey Ferguson 360 Specifications

General Specifications
Model Massey Ferguson 360
Length 2WD: 3,340 mm (131.5 in)
4WD: 3,580 mm (140.9 in)
Width 1,870 mm (73.6 in)
Height 2WD: 2,390 mm (94.1 in)
4WD: 2,380 mm (93.7 in)
Wheel base 2WD: 1,930 mm (76 in)
4WD: 2,110 mm (83.1 in)
Ground clearance 2WD: 240 mm (9.4 in)
4WD: 260 mm (10.2 in)
Weight 2WD: 2,230 kg (4,916 lbs)
4WD: 2,425 kg (5,346 lbs)
Fuel tank capacity 68.1 liters (18 US gal.; 15 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Perkins AT3.152.4
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.5 L, 2,491 cm2, (152.0 cu·in)
Bore and stroke 91.0 mm X 127.0 mm (3.58 in X 5 in)
Horsepower 60.8 PS (44.7 kW; 60.0 HP) at 2,200 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential wet disc
Transmission model
Transmission type Gear type
Gears 8 forward and 2 reverse
Transmission model
Transmission type Mechanical shuttle
Gears 6 forward and 2 reverse
Transmission model
Transmission type Synchromesh
Gears 12 forward and 4 reverse
Tires
Front tires Ag: 6.00-16 (2WD), 8.30-24 (4WD)
Rear tires Ag: 13.6-28

Three-Point Hitch
Category II/I
Control type Position and draft control
Lift capacity (at ends) 1,760 kg (3,890 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with two-stage clutch or independent (optional for 4WD)
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 43.5 L (11.5 US. gal, 9.6 Imp. gal.)
Pressure 3000 psi (206.8 bar)
Valves 1
Pump flow 4.5 gpm (17.0 lpm)
3-point: 9.2 gpm (34.8 lpm)
Total flow 13.7 gpm (51.9 lpm)

Maybe that’s all the information about the Massey Ferguson 360 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment