Mitsubishi MT180

Specifications and review tractor Mitsubishi MT180 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Mitsubishi MT180The Mitsubishi MT180 is a 2WD or 4WD compact utility tractor manufactured by Mitsubishi from 1984 to 1991. The Mitsubishi MT180 is equipped with a 0.9 L (54.9 cu·in) three-cylinder diesel engine and one of two transmissions: a hydrostatic transmission with infinite (2-range) forward and reverse gears or a sliding gear transmission with 6 forward and 2 reverse gears.

The Mitsubishi MT180 compact utility tractor used the Mitsubishi K3C engine. It is a 0.9 L, 899 cm2, (54.9 cu·in) three-cylinder natural aspirated diesel engine with 70.0 mm (2.76 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 18.8 PS (13.8 kW; 18.5 HP) at 2,700 rpm of output power.

The Mitsubishi MT180 is equipped with manual steering, drum brakes, an open operator station, and 18.2 liters (4.8 US gal.; 4 Imp. gal) fuel tank.

Mitsubishi MT180 variants:

  • MT180 – 2WD Gear
  • MT180D – 4WD Gear
  • MT180HM – 2WD Hydro
  • MT180HMD – 4WD Hydro

Mitsubishi MT180 Specifications

General Specifications
Model Mitsubishi MT180
Length 2,220 mm (87.4 in)
Width 2WD: 930 mm (36.6 in)
4WD: 970 mm (38.2 in)
Height (steering wheel) 2WD: 1,170 mm (46.1 in)
4WD: 1,180 mm (46.5 in)
Wheel base 1,420 mm (55.9 in)
Ground clearance 2WD: 270 mm (10.6 in)
4WD: 210 mm (8.3 in)
Weight 2WD: 575 kg (1,268 lbs)
4WD: 625 kg (1,378 lbs)
Fuel tank capacity 18.2 liters (4.8 US gal.; 4 Imp. gal)
Battery 12V, 45Ah
Cabin type Open operator station
Engine
Engine model Mitsubishi K3C
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.9 L, 899 cm2, (54.9 cu·in)
Bore and stroke 70.0 mm X 78.0 mm (2.76 in X 3.07 in)
Compression ratio 23.0:1
Horsepower 18.8 PS (13.8 kW; 18.5 HP) at 2,700 rpm
Torque 51.9 N·m (5.3 kg·m, 38.3 ft·lb) at 1,600 rpm
Starter Electric
Oil capacity: 3.0 L (3.2 US. qt, 2.6 Imp. qt.)
Coolant capacity: 5.0 L (5.3 US. qt, 4.4 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Manual
Brakes Drum
Differential lock Mechanical rear
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Transmission model
Transmission type Sliding gear
Gears 6 forward and 2 reverse
Speed Forward: 14.5 kmh (9 mph) Reverse: 6.9 kmh (4.3 mph)
Transmission oil capacity 12.5 L (3.3 US. gal, 2.7 Imp. gal.)
Tires
Front tires Ag: 4.50-10 (2WD), 5-12 (4WD)
Rear tires Ag: 8-18

Three-Point Hitch
Category I
Control type Position control
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 12.1 L (3.2 US. gal, 2.7 Imp. gal.)
Pressure 1920 psi (132.4 bar)
Pump flow 3.4 gpm (12.9 lpm)

Maybe that’s all the information about the Mitsubishi MT180 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment