New Holland 8340

Specifications and review tractor New Holland 8340 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

New Holland 8340The New Holland 8340 is a 2WD or 4WD row-crop tractor from the PowerStar 40 series. This tractor was manufactured by New Holland in Basildon, England from 1996 to 1997. The New Holland 8340 is equipped with a 7.5 L (456.0 cu·in) six-cylinder diesel engine and one of two transmissions: a synchronized shuttle transmission with 12 forward and 12 reverse gears or a four-speed power shift transmission with 16 forward and 16 reverse gears.

The New Holland 8340 row-crop tractor used the Ford Genesis engine. It is a 7.5 L, 7,472 cm2, (456.0 cu·in) six-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 107.4 PS (79.0 kW; 106.0 HP) at 2,100 rpm of output power.

The New Holland 8340 is equipped with hydrostatic power steering, hydraulic wet disc brakes, two-post foldable ROPS with flat-deck platform or Comfort Command Cab (optional), and 217.6 liters (57.5 US gal.; 47.9 Imp. gal) fuel tank.

Ford 8340 variants:

  • SL: 12-speed
  • SLE: 16-speed premium

Ford 8340 Specifications

General Specifications
Model New Holland 8340
Length 4,470 mm (176 in)
Width 2,100 mm (82.7 in)
Height (cab) 2,790 mm (109.8 in)
Wheel base 2WD: 2,690 mm (105.9 in)
4WD: 2,610 mm (102.8 in)
Ground clearance (front axle) 2WD: 600 mm (23.6 in)
4WD: 550 mm (21.7 in)
Weight (shipping) 2WD ROPS: 3,940 kg (8,686 lbs)
4WD ROPS: 4,420 kg (9,744 lbs)
2WD Cab: 4,455 kg (9,824 lbs)
4WD Cab: 4,935 kg (10,882 lbs)
Fuel tank capacity 217.6 liters (57.5 US gal.; 47.9 Imp. gal)
Battery One 12V (ROPS), Two 12V (Cab), CCA 800A
Cabin type Two-post foldable ROPS with flat-deck platform or Comfort Command Cab (optional)
Engine
Engine model Ford Genesis
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.5 L, 7,472 cm2, (456.0 cu·in)
Bore and stroke 112.0 mm X 127.0 mm (4.41 in X 5 in)
Compression ratio 17.5:1
Horsepower 107.4 PS (79.0 kW; 106.0 HP) at 2,100 rpm
Starter Electric
Oil capacity: 20.9 L (22.1 US. qt, 18.4 Imp. qt.)
Coolant capacity: ROPS: 20.0 L (21.1 US. qt, 17.6 Imp. qt.)
Cab: 21.5 L (22.7 US. qt, 19.7 Imp. qt.)

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD (optional)
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Final drive Inboard planetary
Differential lock Electro-hydraulic
Transmission model SynchroShift
Transmission type Synchronized shuttle with dry disc clutch
Gears 12 forward and 12 reverse
Speed Forward: 30.9 kmh (19.2 mph)
Transmission model ElectroShift/Pulse Command
Transmission type Four-speed power shift with wet disc clutch
Gears 16 forward and 16 reverse
Speed Forward: 30.7 kmh (19.1 mph)
Transmission oil capacity 60.6 L (16 US. gal, 13.3 Imp. gal.)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38

Three-Point Hitch
Category II
Control type Position control and top-link draft sensing (8340 SL)
Electronic lower-link sensing (8340 SLE)
Lift capacity (at ends) SL: 2,815 kg (6,205 lbs)
SL optional: 3,735 kg (8,240 lbs)
SLE: 2,975 kg (6,565 lbs)
SLE optional: 3,950 kg (8,710 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Gear pump (SL) or closed center load sensing (SLE)
Valves 1 to 4
Pump flow 17.4 gpm (65.9 lpm)
SLE: 20.0 gpm (75.7 lpm)

Maybe that’s all the information about the New Holland 8340 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment