New Holland TN55

Specifications and review tractor New Holland TN55 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

New Holland TN55The New Holland TN55 is a 2WD or 4WD utility tractor from the TN series. This tractor was manufactured by New Holland in Jesi, Italy from 1999 to 2004. The NH TN55 is equipped with a 2.9 L (179.0 cu·in) three-cylinder diesel engine and one of four transmission varians.

The New Holland TN55 utility tractor used the Iveco 8035 engine. It is a 2.9 L, 2,933 cm2, (179.0 cu·in) three-cylinder natural aspirated diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. The compression ratio rating is 18.0:1. This engine produced 53.7 PS (39.5 kW; 53.0 HP) at 2,300 rpm of output power and 200.7 N·m (20.5 kg·m, 147.9 ft·lb) at 1,400 rpm of torque.

The New Holland TN55 is equipped with power steering, differential hydraulic wet disc brakes, two-post folding ROPS or cab (optional), and 65.5 liters (17.3 US gal.; 14.4 Imp. gal) fuel tank.

Following attachments are available for the New Holland TN55 utility tractor:

  • New Holland 32LA loader
  • New Holland 32LA MSL loader
  • New Holland 33LA loader
  • New Holland 33LA MSL loader

New Holland TN55 variants:

  • TN55: ROPS
  • TN55D: Cab
  • TN55S: SuperSteer

New Holland TN55 Specifications

General Specifications
Model New Holland TN55
Length 3,930 mm (154.7 in)
Width 1,700 mm (66.9 in)
Height ROPS: 2,410 mm (94.9 in)
Cab: 2,300 mm (90.6 in)
Wheel base 2WD ROPS: 2,070 mm (81.5 in)
4WD ROPS: 2,000 mm (78.7 in)
2WD Cab: 2,130 mm (83.9 in)
4WD Cab: 2,060 mm (81.3 in)
4WD SuperSteer: 2,370 mm (93.5 in)
Weight (shipping) 2WD ROPS: 2,070 kg (4,564 lbs)
4WD ROPS: 2,285 kg (5,038 lbs)
2WD Cab: 2,235 kg (4,930 lbs)
4WD Cab: 2,510 kg (5,530 lbs)
2WD SuperSteer: 2,375 kg (5,235 lbs)
4WD SuperSteer: 2,575 kg (5,675 lbs)
Fuel tank capacity 65.5 liters (17.3 US gal.; 14.4 Imp. gal)
Battery 12V, CCA 730A
Cabin type Two-post folding ROPS or Cab (optional)
Engine model Iveco 8035
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.9 L, 2,933 cm2, (179.0 cu·in)
Bore and stroke 104.0 mm X 115.0 mm (4.09 in X 4.53 in)
Compression ratio 18.0:1
Horsepower 53.7 PS (39.5 kW; 53 HP) at 2,300 rpm
Torque 200.7 N·m (20.5 kg·m, 147.9 ft·lb) at 1,400 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Final drive Planetary
Transmission model
Transmission type Gear type with dry disc clutch
Gears 8 forward and 8 reverse
Speed Forward: 30.3 kmh (18.8 mph) Reverse: kmh (0 mph)
Transmission model Synchro Command
Transmission type Partially synchronized with dry disc clutch (mechanical shuttle) wet disc (power shuttle)
Gears 8 forward and 8 reverse
Speed Forward: 30.3 kmh (18.8 mph) Reverse: kmh (0 mph)
Transmission model Synchro Command Plus
Transmission type Partially synchronized
Gears 16 forward and 16 reverse
Front tires Ag: 7.50-16 (2WD), 8.3-24 (4WD)
Rear tires Ag: 14.9-28

Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 1,797 kg (3,962 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with dry disc clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 42.0 L (11.1 US. gal, 9.2 Imp. gal.)
Pressure 2755 psi (189.9 bar)
Valves 1 or 2
Pump flow 12.4 gpm (46.9 lpm)
16.9 gpm (64.0 lpm)
Steering flow 7.2 gpm (27.3 lpm)
9.2 gpm (34.8 lpm)

Maybe that’s all the information about the New Holland TN55 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment