New Holland Workmaster 55

Specifications and review tractor New Holland Workmaster 55 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

New Holland Workmaster 55The New Holland Workmaster 55 is a 2WD or 4WD utility tractor from the Workmaster series. This tractor was manufactured by New Holland in India from 2009 to 2014. The New Holland Workmaster 55 is equipped with a 2.2 L (135.0 cu·in) four-cylinder diesel engine and a synchronized mechanical shuttle transmission with 8 forward and 8 reverse gears.

The New Holland Workmaster 55 utility tractor used the ISM engine. It is a 2.2 L, 2,212 cm2, (135.0 cu·in) four-cylinder turbocharged diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 100.0 mm (3.94 in) of the piston stroke. The compression ratio rating is 23.4:1. This engine produced 55.8 PS (41.0 kW; 55.0 HP) at 2,700 rpm of output power.

The New Holland Workmaster 55 is equipped with hydrostatic power steering, differential mechanical wet disc brakes, two-post foldable ROPS, and 51.0 liters (13.5 US gal.; 11.2 Imp. gal) fuel tank. This utility tractor could be equipped with the New Holland 615TL loader.


New Holland Workmaster 55 Specifications

General Specifications
Model New Holland Workmaster 55
Length 2WD: 3,320 mm (130.7 in)
4WD: 3,390 mm (133.5 in)
Width 1,710 mm (67.3 in)
Height 2,430 mm (95.7 in)
Wheel base
Weight 2WD: 1,710 kg (3,770 lbs)
4WD: 1,850 kg (4,080 lbs)
Fuel tank capacity 51.0 liters (13.5 US gal.; 11.2 Imp. gal)
Battery 12V, CCA: 800A
Cabin type Two-post foldable ROPS
Engine
Engine model ISM
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 2.2 L, 2,212 cm2, (135.0 cu·in)
Bore and stroke 84.0 mm X 100.0 mm (3.31 in X 3.94 in)
Compression ratio 23.4:1
Horsepower 55.8 PS (41.0 kW; 55.0 HP) at 2,700 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential mechanical wet disc
Final drive Differential lock: mechanical rear
Transmission model
Transmission type Synchronized mechanical shuttle
Gears 8 forward and 8 reverse
Tires
Front tires Ag: 7.5×16 (2WD), 9.5×24 (4WD)
Rear tires Ag: 14.9×28

Three-Point Hitch
Caterogy II/I
Control type Position control and mechanical draft sensing
Lift capacity (at ends) 1,170 kg (2,580 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 1 or 2
Pump flow 11.6 gpm (43.9 lpm)
Steering flow 5.3 gpm (20.1 lpm)
Total flow 16.9 gpm (64 lpm)

Maybe that’s all the information about the New Holland Workmaster 55 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment