New Holland Workmaster 60

Specifications and review tractor New Holland Workmaster 60 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

New Holland Workmaster 60The New Holland Workmaster 60 is a 2WD or 4WD utility tractor from the Workmaster series. This tractor has been manufactured by New Holland (a part of CNH) since 2015. The New Holland Workmaster 60 is equipped with a 2.2 L (136.0 cu·in) three-cylinder diesel engine and a synchronized shuttle transmission with 8 forward and 8 reverse gears.

The NH Workmaster 60 utility tractor used the FPT R753 engine. It is a 2.2 L, 2,229 cm2, (136.0 cu·in) three-cylinder natural aspirated diesel engine with 94.0 mm (3.7 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,600 rpm of output power.

The Workmaster 60 is equipped with power steering, wet disc brakes, two-post folding ROPS and 52.2 liters (13.8 US gal.; 11.5 Imp. gal) fuel tank.

Following attachments are available for the NH Workmaster 60 utility tractor:

  • New Holland 611TL loader
  • New Holland 616TL loader
  • New Holland 621TL loader
  • New Holland 626TL loader
  • New Holland 935GHB backhoe

New Holland Workmaster 60 Specifications

General Specifications
Model New Holland Workmaster 60
Length 2WD: 3,280 mm (129.1 in)
4WD: 3,400 mm (133.9 in)
Width 1,960 mm (77.2 in)
Height (ROPS) 2,470 mm (97.2 in)
Wheel base 2WD: 2,440 mm (96.1 in)
4WD: 2,470 mm (97.2 in)
Weight 2WD: 2,015 kg (4,442 lbs)
4WD: 2,295 kg (5,060 lbs)
Fuel tank capacity 52.2 liters (13.8 US gal.; 11.5 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS
Engine model FPT R753
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.2 L, 2,229 cm2, (136.0 cu·in)
Bore and stroke 94.0 mm X 107.0 mm (3.7 in X 4.21 in)
Horsepower 60.8 PS (44.7 kW; 59.9 HP) at 2,600 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Transmission model
Transmission type Synchronized shuttle
Gears 8 forward and 8 reverse
Front tires Ag: 7.5×16 (2WD), 9.5×24 (4WD)
Industrial: 12.5×18
Rear tires Ag: 14.9×28
Industrial: 18.4×24

Three-Point Hitch
Category II/I
Control type Position and draft control
Lift capacity (at ends) 1,500 kg (3,310 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with mechanical clutch
Rear PTO speed 540 or 540/540E rpm
Hydraulic system
Hydraulic type Open center
Valves 1 or 2
Pump flow 12.0 gpm (45.4 lpm)
Steering flow 5.5 gpm (20.8 lpm)
Total flow 17.5 gpm (66.2 lpm)

Maybe that’s all the information about the New Holland Workmaster 60 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment