Oliver 2655

Specifications and review tractor Oliver 2655 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Oliver 2655The Oliver 2655 is a four-wheel drive tractor manufactured by Oliver in Minneapolis, Minnesota, USA from 1971 to 1972.

The Oliver 2655 is equipped with one of two engines: a 9.6 L (585.0 cu·in) six-cylinder diesel engine or a 8.3 L (504.0 cu·in) six-cylinder LP-gas engine and a transmission with 10 forward and 2 reverse gears.

The tractor could be equipped with the following engines:

  • Minneapolis-Moline diesel engine. It is a 9.6 L, 9,586 cm2, (585.0 cu·in) six-cylinder natural aspirated diesel engine with 121.0 mm (4.76 in) of the cylinder bore and 140.0 mm (5.51 in) of the piston stroke. The compression ratio rating is 15.3:1. This engine produced 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm of output power.
  • Minneapolis-Moline LP-gas engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder natural aspirated LP-gas engine. The cylinder bore is 117.0 mm (4.61 in) and the piston stroke is 127.0 mm (5 in). This engine produced 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm of output power.

The Oliver 2655 is equipped with hydrostatic power steering, hydraulic dry disc brakes, cab (standard), and 378.5 liters (100 US gal.; 83.3 Imp. gal) fuel tank.


Oliver 2655 Specifications

General Specifications
Model Oliver 2655
Length
Width
Height
Wheel base 3,040 mm (119.7 in)
Weight (operating) 9,000 kg (19,842 lbs)
Fuel tank capacity 378.5 liters (100 US gal.; 83.3 Imp. gal)
Battery
Cabin type Cab (standard)
Engine
Engine model Minneapolis-Moline
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 9.6 L, 9,586 cm2, (585.0 cu·in)
Bore and stroke 121.0 mm X 140.0 mm (4.76 in X 5.51 in)
Compression ratio 15.3:1
Horsepower 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm
Starter Electric
Coolant capacity: 31.2 L (33 US. qt, 27.5 Imp. qt.)
Engine
Engine model Minneapolis-Moline
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type LP-gas
Displacement 8.3 L, 8,259 cm2, (504.0 cu·in)
Bore and stroke 117.0 mm X 127.0 mm (4.61 in X 5 in)
Horsepower 171.4 PS (126.0 kW; 169.0 HP) at 2,200 rpm
Starter Electric

Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Hydrostatic power
Brakes Hydraulic dry disc
Transmission model
Transmission type
Gears 10 forward and 2 reverse
Speed Forward: 38.1 kmh (23.7 mph) Reverse: 10.5 kmh (6.5 mph)
Tires
Front tires Ag: 18.4-34
Rear tires Ag: 18.4-34

Three-Point Hitch
Category III/II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 121.1 L (32 US. gal, 26.6 Imp. gal.)
Valves 2 or 3
Pump flow 21.0 gpm (79.5 lpm)

Maybe that’s all the information about the Oliver 2655 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment