Specifications and review tractor Shibaura SF1040T Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..
The Shibaura SF1040T is a 4WD utility tractor manufactured by Shibaura in Matsumoto, Japan. The Shibaura SF1040T is equipped with a 0.3 L (17.0 cu·in) four-cylinder diesel engine and a constant mesh transmission with 16 forward and 4 reverse gears.
The Shibaura SF1040T utility tractor used the Shibaura LER1104T engine. It is a 4.6 L, 4,560 cm2, (278.3 cu·in) four-cylinder turbocharged diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm of output power.
The Shibaura SF1040T is equipped with hydrostatic power steering, mechanical wet disc brakes, an open operator station or two-post ROPS, and 100.0 liters (26.4 US gal.; 22 Imp. gal) fuel tank.
|
|
Shibaura SF1040T Specifications
| General Specifications | |
| Model | Shibaura SF1040T |
| Length | 4,080 mm (160.6 in) |
| Width | 1,870 mm (73.6 in) |
| Height | 2,740 mm (107.9 in) |
| Wheel base | – |
| Weight | 3,590 kg (7,915 lbs) |
| Fuel tank capacity | 100.0 liters (26.4 US gal.; 22 Imp. gal) |
| Battery | 12V, 170Ah |
| Cabin type | Open operator station or two-post ROPS |
| Engine | |
| Engine model | Shibaura LER1104T |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.6 L, 4,560 cm2, (278.3 cu·in) |
| Bore and stroke | 110.0 mm X 120.0 mm (4.33 in X 4.72 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm |
| Starter | Electric |
|
|
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Mechanical wet disc |
| Transmission model | – |
| Transmission type | Constant mesh with dry disc clutch |
| Gears | 16 forward and 4 reverse |
| Tires | |
| Front tires | Ag: 12.4-24 |
| Rear tires | Ag: 18.4-34 |
|
|
| Three-Point Hitch | |
| Category | II |
| Control type | Position and draft control |
| Lift capacity (at ends) | 2,500 kg (5,515 lbs) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 25.0 L (6.6 US. gal, 5.5 Imp. gal.) |
| Pressure | 2900 psi (199.9 bar) |
| Pump flow | 9.3 gpm (35.2 lpm) |
Maybe that’s all the information about the Shibaura SF1040T tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you
