Snapper 1650

Specifications and review tractor Snapper 1650 Technical characteristics, dimensions, weight, power, photos and and publish possibly complete information on specifications, technical data of more than 12.000 tractors and machines. If you choose sort items by model, year, power and factory..

Snapper 1650The Snapper 1650 is a 2WD garden tractor manufactured by Snapper in Fort Worth, Texas, USA from 1979 to 1984. The Snapper 1650 is equipped with a 0.6 L (35.9 cu·in) single-cylinder gasoline engine and a hydrostatic transmission with infinite forward and reverse (2-range) gears.

The Snapper 1650 garden tractor used the Kohler K341 engine. It is a 0.6 L, 588 cm2, (35.9 cu·in) single-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 83.0 mm (3.27 in) of the piston stroke. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm of output power.

The Snapper 1650 is equipped with manual steering, disc brakes, an open operator station, and 13.2 liters (3.5 US gal.; 2.9 Imp. gal) fuel tank.

Following attachments are available for the Snapper 1650 garden tractor:

  • Mid-mount Snapper 48 in (1,210 mm) mower deck with 3-blade
  • Front-mount Snapper 48 in (1,210 mm) blade
  • Front-mount Snapper 42 in (1,060 mm) snow blower

Snapper 1650 Specifications

General Specifications
Model Snapper 1650
Length 1,790 mm (70.5 in)
Width 1,050 mm (41.3 in)
Height (steering wheel) 1,150 mm (45.3 in)
Wheel base 1,190 mm (46.9 in)
Weight 1650: 390 kg (860 lbs)
1650A: 430 kg (948 lbs)
Fuel tank capacity 13.2 liters (3.5 US gal.; 2.9 Imp. gal)
Battery 12V
Cabin type Open operator station
Engine
Engine model Kohler K341
Engine type Four-stroke, air-cooled, inline
Cylinders 1
Fuel type Gasoline
Displacement 0.6 L, 588 cm2, (35.9 cu·in)
Bore and stroke 95.0 mm X 83.0 mm (3.74 in X 3.27 in)
Horsepower 16.2 PS (11.9 kW; 16.0 HP) at 3,600 rpm
Starter Electric

Transmission and chassis
Chassis 4×2 2WD
Steering type Manual
Brakes Disc
Transmission model Eaton
Transmission type Hydrostatic
Gears Infinite forward and reverse (2-range)
Speed Forward: 17.7 kmh (11.0 mph) Reverse: 12.9 kmh (8.0 mph)
Tires
Front tires Lawn/turf: 16×6.50-8
Rear tires Lawn/turf: 23×10.50-12

Three-Point Hitch
Category 0 (optional)
Control type
Lift capacity (at ends) 294 kg (648 lbs)
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed
Rear PTO type Independent (optional)
Rear PTO speed 1,000 rpm

Maybe that’s all the information about the Snapper 1650 tractor specification review that you might be looking for or what you need. If any information is wrong or lacking, please comment below. Thank you

Leave a Comment